Make a Table Saw Out Feed Table Part 3

This is part 3 of 3 videos that will show you how to build a folding out feed for your table saw. The design is from a 2009 issue of woodworkers Journal and I really like the sliding dovetail support leg. The table is a perfect addition to my table saw. Once again Note: This is a complete step by step of the build, detailing each step of the construction. Which is intended to assist anyone who is thinking of building an out feed table for their table saw. The original article complete with plan and material list can be found here www.zinio.com Music provided by Julie Neumark www.julieneumark.com http – Website www.ufoww.com – The United Federation of Woodworkers member site http – Follow me on Twitter www.facebook.com – Like Me on Facebook www.cafepress.com – A Simple Design of Ocala “Gear” Store asimpledesignofocalashopt.createaforum.com – Shop Talk Woodworker’s Forum
Video Rating: 0 / 5

theturningshop.blogspot.com plus.google.com www.facebook.comWood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Turning a apple on the lathe.
Video Rating: 4 / 5

Incoming search terms:

  • woodworkers journal out feed table plan
  • woodworkers journal 2009 out feed table

Related posts:

  1. Woodworking—Table Saw Out-Feed 1 of 2
  2. Woodturning Projects two part vase
  3. How to make a bandsaw box on the lathe Wood ...
  4. Woodturning Projects Winged Box 1of 2
  5. Wood Turning Projects Turning A Flower

Comments

  1. Laney Shaughnessy says:

    They should be public… check my channel

  2. BackyardWoodworking says:

    Where’s part 1 an 2 LOL

  3. ThatWoodWorking says:

    You could of made it into a box!

  4. Chris Black says:

    Thank’s for the link, i got your message about this video being on here after i suggested to you about making one :) i’ll give your way a go and see which method I prefer.
    Thanks, Chris

  5. Classdrummer95 says:

    Fantastic stuff! This is exactly what I need for a woodwork project at school! Thank you.

  6. The change in camera angles was great – allows newbies (aka me) a little more insight into how you use turning chisels :) Love the vids – keep it up.

  7. The change in camera angles was great – allows newbies (aka me) a little more insight into how you use turning chisels :) Love the vids – keep it up.

  8. TheFishingschool says:

    no i just gotta call the company and tell them it aint here yet they said 6-10 weeks

    =(

  9. I’m sure that working with two cameras is a lot more work, but it makes for a far more interesting video!

    Look forward to each new vid, Carl!

  10. Like the different camera angles. It definitely adds to the videos.

  11. Like the different camera angles. It definitely adds to the videos.

  12. Carl Jacobson says:

    If I could figure out how to turn a maple leaf. :)

  13. Carl Jacobson says:

    Hi Cody,

    Did you get your new Lathe yet?

    Thanks,
    Carl

  14. Carl Jacobson says:

    Thanks. I was playing around with two cameras and thought it looked pretty good too.
    Carl

  15. you could probably do a curved stem by using the same method you would to make a excentric goblett

  16. mats persson says:

    Another great video,i like that you are moving the camera…thanks for your videos,i love them

  17. TheFishingschool says:

    do you realize what u just said?

  18. mersyturning says:

    he should try a maple out of apple

  19. TheFishingschool says:

    how ironic……………. an apple out of maple….you carl can sure think out of the box! good job!

  20. psychodelicdragon says:

    show us how to do a curved stem, PLEASE 10 thumbs up!!!

Speak Your Mind

*


*

Page optimized by WP Minify WordPress Plugin